### Table of Contents

- Introduction
- The Model Statement
- The Syntax
- Classification of Models
- Linear Programming (LP)
- Nonlinear Programming (NLP)
- Quadratically Constrained Programs (QCP)
- Nonlinear Programming with Discontinuous Derivatives (DNLP)
- Mixed Integer Programming (MIP)
- Mixed Integer Nonlinear Programming (MINLP)
- Mixed Integer Quadratically Constrained Programs (MIQCP)
- Mixed Complementarity Problem (MCP)
- Constrained Nonlinear System (CNS)
- Mathematical Program with Equilibrium Constraints (MPEC)
- Extended Mathematical Programs (EMP)

- Model Attributes

- The Solve Statement
- Programs with Several Solve Statements
- Choosing a Solver
- Making New Solvers Available with GAMS

# Introduction

This chapter brings together all the concepts discussed in previous chapters by explaining how to specify a model and solve it.

# The Model Statement

The model statement is used to collect equations into groups and to label them so that they can be solved. The simplest form of the model statement uses the keyword `all`

: the model consists of all equations declared before the model statement is entered. For most simple applications this is all the user needs to know about the model statement.

## The Syntax

In general, the syntax for a model declaration in GAMS is as follows:

```
model[s] model_name [text] [/ (all | eqn_name {, eqn_name}) {, var_name(set_name)} /]
{,model_name [text] [/ (all | eqn_name {, eqn_name}) {, var_name(set_name)} /]} ;
```

The keyword `model[s]`

indicates that this is a `model`

statement and `model_name`

is the internal name of the model in GAMS, it is an identifier. The optional explanatory text is used to describe the model, `all`

is a keyword as introduced above and `eqn_name`

is the name of an equation that has been declared prior to the model statement. `Var_name(set_name)`

is a couple of previous declared variable and and set to limit the domain of variables in the model. More details about this are described in the following subsection. For advice on explanatory text and how to choose a `model_name`

, see the tutorial Good Coding Practices.

- Note
- Model statements for Mixed Complementarity Problem (MCP) and Mathematical Program with Equilibrium Constraints (MPEC) models require a slightly different notation, since complementarity relationships need to be included. For details see subsections Mixed Complementarity Problem (MCP) and Mathematical Program with Equilibrium Constraints (MPEC).

An example of a model definition in GAMS is shown below.

```
Model transport "a transportation model" / all /;
```

The `model`

is called `transport`

and the keyword `all`

is a shorthand for all known (declared) equations.

Several models may be declared (and defined) in one model statement. This is useful when experimenting with different ways of writing a model, or if one has different models that draw on the same data. Consider the following example, adapted from [PROLOG], in which different groups of the equations are used in alternative versions of the problem. Three versions are solved: the linear, nonlinear, and 'expenditure' versions. The model statement to define all three is:

```
Model nortonl "linear version" / cb,rc,dfl,bc,obj /
nortonn "nonlinear version" / cb,rc,dfn,bc,obj /
nortone "expenditure version" / cb,rc,dfe,bc,obj / ;
```

Here `cb`

, `rc`

, etc. are the names of the equations. We will describe below how to obtain the solution to each of the three models.

- Note
- If several models are declared and defined with one model statement, the models have to be separated by commas or linefeeds and a semicolon terminates the entire statement.

If several models are declared then it is possible to use one previously declared model in the declaration of another. The following examples illustrate this:

```
Model one "first model" / tcost_eq, supply_eq, demand_eq /
two "second model that nests first" / one, balance_eq /
three "third model that nests first and second" / two, capacity_eq, configure_eq /;
```

Model `one`

is declared and defined using the general syntax, model `two`

contains all the equations of model `one`

and the equation `balance_eq`

, and model `three`

contains all of model `two`

and the equations `capacity_eq`

and `configure_eq`

.

In addition to nesting models as illustrated above, it is also possible to use the symbols `+`

and `-`

to augment or remove items relative to models that were previously defined. The following examples serve as illustration:

```
Model four "fourth model: model three minus model one" / three-one /
five "fifth model: model three without eqn configure_eq" / three-configure_eq /
six "sixth model: model four plus model two" / four+two /;
```

Model `four`

contains the equations from model `three`

except for those that belong to model `one`

. Model `five`

contains all equations from model `three`

except for equation `configure_eq`

. Model `six`

contains the union of the equations in model `four`

and `two`

. Note that both model names and equation names may be used in association with the symbols `+`

and `-`

.

### Limited domain for variables

As mentioned above, it is possible to limit the domain of variables used in a model in the model statement. This allows to restrict the generation of blocks of variables in a single place instead of using, e.g., dollar conditions at every place where this variable block is used in equations (which might be required for an efficient model generation).

The following examples is based on the basic transportation model [TRNSPORT]. To limit the transportation network in that model to certain links (e.g. because some are blocked because of some reason) one could introduce a subset of the free links and use that with dollar conditions in the equations like this:

```
* Initialize whole network as free
Set freeLinks(i,j) Useable links in the network / #i.#j /;
cost.. z =e= sum((i,j), c(i,j)*x(i,j)$freeLinks(i,j));
supply(i).. sum(j, x(i,j)$freeLinks(i,j)) =l= a(i);
demand(j).. sum(i, x(i,j)$freeLinks(i,j)) =g= b(j);
* Block a particular link
freeLinks('san-diego','topeka') = no;
Model transport / all /;
solve transport using lp minimizing z;
```

Now, instead of adding the dollar condition to each appearance of `x`

in the model, one could simply add a domain restriction for that variable to the model statement directly by specifying a variable and the set that limits its domain. Using this approach, the previous example looks like this:

```
* Initialize whole network as free
Set freeLinks(i,j) Useable links in the network / #i.#j /;
cost.. z =e= sum((i,j), c(i,j)*x(i,j));
supply(i).. sum(j, x(i,j)) =l= a(i);
demand(j).. sum(i, x(i,j)) =g= b(j);
* Block a particular link
freeLinks('san-diego','topeka') = no;
Model transport / all, x(freeLinks) /;
solve transport using lp minimizing z;
```

- Note
- If one adds the domain restriction to the model statement, internally GAMS inserts a dollar condition to every appearance of the restricted variables in equations of the model. When doing this, the indices are copied as they appear with the variable. So, in the example above,
`x(i,j)`

becomes`x(i,j)$freeLinks(i,j)`

. In the same way`x(i-1,j+1)`

becomes`x(i-1,j+1)$freeLinks(i-1,j+1)`

and`x('seattle','chicago')`

becomes`x('seattle','chicago')$freeLinks('seattle','chicago')`

.

- Attention
- As a consequence of above's note one could see some unexpected results, like "division
by zero errors", if it is not done carefully. For example, the following dummy model, will trigger such an error, since we sum over all
`i`

, but some`x`

were excluded leaving a`0`

as divisor:`Set i / i1*i3 / sub(i) / i2 /; Positive Variable x(i); Variable z; Equation obj; obj.. z =e= sum(i, 1/x(i)); x.lo(i) = 1; Model m / obj, x(sub) /; solve m min z use nlp;`

## Classification of Models

Various types of problems can be solved with GAMS. Note that the type of the model must be known before it may be solved. The model types are briefly discussed in this section. GAMS checks that the model is in fact the type the user thinks it is, and issues explanatory error messages if it discovers a mismatch - for instance, that a supposedly linear model contains nonlinear terms. Some problems may be solved in more than one way, and the user has to choose which way to use. For instance, if there are binary or integer variables in the model, it can be solved either as a `MIP`

or as a `RMIP`

.

The model types and their identifiers, which are needed in the a solve statement, are given in Table 1. For details on the solve statement, see section The Solve Statement.

GAMS Model Type | Model Type Description | Requirements and Comments |
---|---|---|

LP | Linear Program | Model with no nonlinear terms or discrete (i.e. binary, integer, etc) variables. |

NLP | Nonlinear Program | Model with general nonlinear terms involving only smooth functions, but no discrete variables. For a classification of functions as to smoothness, see section Functions. |

QCP | Quadratically Constrained Program | Model with linear and quadratic terms, but no general nonlinear terms or discrete variables. |

DNLP | Discontinuous Nonlinear Program | Model with non-smooth nonlinear terms with discontinuous derivatives, but no discrete variables. This is the same as `NLP` , except that non-smooth functions may appear as well. These models are more difficult to solve than normal `NLP` models and we strongly advise not to use this model type. |

MIP | Mixed Integer Program | Model with binary, integer, SOS and/or semi variables, but no nonlinear terms. |

RMIP | Relaxed Mixed Integer Program | Like `MIP` , except that the discrete variable requirement is relaxed. See the note below on relaxed model types. |

MINLP | Mixed Integer Nonlinear Program | Model with both nonlinear terms and discrete variables. |

RMINLP | Relaxed Mixed Integer Nonlinear Program | Like `MINLP` except that the discrete variable requirement is relaxed. See the note below on relaxed model types. |

MIQCP | Mixed Integer Quadratically Constrained Program | Model with both quadratic terms and discrete variables, but no general nonlinear term. |

RMIQCP | Relaxed Mixed Integer Quadratically Constrained Program | Like `MIQCP` except that the discrete variable requirement is relaxed. See the note below on relaxed model types. |

MCP | Mixed Complementarity Problem | A square, possibly nonlinear, model that generalizes a system of equations. Rows and columns are matched in one-to-one complementary relationships. |

CNS | Constrained Nonlinear System | Model solving a square, possibly nonlinear system of equations, with an equal number of variables and constraints. |

MPEC | Mathematical Programs with Equilibrium Constraints | A difficult model type for which solvers and reformulations are currently being developed. |

RMPEC | Relaxed Mathematical Program with Equilibrium Constraints | A difficult model type for which solvers and reformulations are currently being developed. See the note below on relaxed model types. |

EMP | Extended Mathematical Program | A family of mathematical programming extensions. |

MPSGE | General Equilibrium | Not actually a model type but mentioned for completeness, see MPSGE. |

**Table 1:** GAMS Model Types

- Note
- The relaxed model types RMIP, RMINLP, RMIQCP, and RMPEC solve the problem as the corresponding model type (e.g. MIP for RMIP) but
*relax*the discrete requirement of the discrete variables. This means that integer and binary variables may assume any values between their bounds. SemiInteger and SemiCont variables may assume any values between 0 and their upper bound. For SOS1 and SOS2 variables the restriction of the number of non-zero values is removed. - Many "LP" solvers like Cplex offer the functionality of solving
*convex*quadratic models. So the Q matrices in the model need to be positive semidefinite. An extension to to this are the second-order cone programs (SOCP) with either symmetric or rotated cones. See the solver manuals (e.g. on MOSEK) for details. - Unlike other checks on the model algebra (e.g. existence of discrete variables or general non-linear terms), the GAMS
*compiler*does not enforce a quadratic model to only consist of quadratic and linear terms. This requirement is enforced at*runtime*for a particular model instance.

- The relaxed model types RMIP, RMINLP, RMIQCP, and RMPEC solve the problem as the corresponding model type (e.g. MIP for RMIP) but

### Linear Programming (LP)

Mathematically, the Linear Programming (LP) problem looks like:

\begin{equation*} \begin{array}{ll} \textrm{Minimize or maximize} & cx \\ \textrm{subject to} & Ax \, \, \alpha \, \, b \\ & L \leq x \leq U, \\ \end{array} \end{equation*}

where \(x\) is a vector of variables that are continuous real numbers, \(cx\) is the objective function, and \(Ax \, \alpha \, b\) represents the set of constraints. Here, \(\alpha\) is an equation operator. For details on the equation types allowed in GAMS, see Equation Types. \(L\) and \(U\) are vectors of lower and upper bounds on the variables.

GAMS supports free (unrestricted) variables, positive variables, and negative variables. Note that users may customize lower and upper bounds, for details see section Bounds on Variables.

For information on LP solvers that can be used through GAMS see the Solver/Model type Matrix.

### Nonlinear Programming (NLP)

Mathematically, the Nonlinear Programming (NLP) problem looks like:

\begin{equation*} \begin{array}{ll} \textrm{Minimize or Maximize} & f(x) \\ \textrm{subject to} & g(x) \, \, \alpha \, \, 0 \\ & L \leq x \leq U, \\ \end{array} \end{equation*}

where \(x\) is a vector of variables that are continuous real numbers, \(f(x)\) is the objective function, and \( g(x) \, \alpha \, 0\) represents the set of constraints. For details on the equation types allowed in GAMS, see Equation Types. Note that the functions \(f(x)\) and \(g(x) \) have to be differentiable. \(L\) and \(U\) are vectors of lower and upper bounds on the variables.

For information on NLP solvers that can be used through GAMS see the Solver/Model type Matrix. See also the tutorial Good NLP Formulations.

- Note
- NLP models may have the nonlinear terms inactive. In this case setting the model attribute TryLinear to 1 causes GAMS to check the model and use the default LP solver if possible. For details on model attributes, see subsection Model Attributes.

### Quadratically Constrained Programs (QCP)

Mathematically, the Quadratically Constrained Programming (QCP) problem looks like:

\begin{equation*} \begin{array}{lll} \textrm{Maximize or Minimize} & cx + x'Q x & \\ \textrm{subject to} & A_i x + x' R_i x \,\, \alpha \,\, b_i & \textrm{for all} \,\, i \\ & L \leq x \leq U, & \\ \end{array} \end{equation*}

where \(x\) denotes a vector of variables that are continuous real numbers, \(cx\) is the linear part of the objective function, \(x'Qx\) is the quadratic part of the objective function, \(A_i x\) represents the linear part of the \(i\)th constraint, \(x' R_i x\) its quadratic part and \(b_i\) its right-hand side. For details on the equation types allowed in GAMS, see Equation Types. Further, \(L\) and \(U\) are vectors of lower and upper bounds on the variables.

Note that a QCP is a special case of the NLP in which all the nonlinearities are required to be quadratic. As such, any QCP model can also be solved as an NLP. However, most "LP" vendors provide routines to solve LP models with a quadratic objective. Some allow quadratic constraints as well. Solving a model using the QCP model type allows these "LP" solvers to be used to solve quadratic models as well as linear ones. Some NLP solvers may also take advantage of the special (quadratic) form when solving QCP models.

- Attention
- In case a model with quadratic
*constraints*is passed to a QCP solver that only allows a quadratic*objective*, a capability error will be returned (`solver status 6 CAPABILITY PROBLEMS`

). Some solvers will fail when asked to solve a non-convex quadratic problems as described above.

- Note
- Using the model attribute TryLinear causes GAMS to see if the problem can be solved as an LP problem. For details on model attributes, see subsection Model Attributes.

For information on QCP solvers that can be used through GAMS see the Solver/Model type Matrix.

### Nonlinear Programming with Discontinuous Derivatives (DNLP)

Mathematically, the Nonlinear Programming with Discontinuous Derivatives (DNLP) problem looks like:

\begin{equation*} \begin{array}{ll} \textrm{Maximize or Minimize} & f(x)\\ \textrm{subject to} & g(x) \, \, \alpha \, \, 0 \\ & L \leq x \leq U, \\ \end{array} \end{equation*}

where \(x\) is a vector of variables that are continuous real numbers, \(f(x)\) is the objective function, \(g(x) \, \alpha \, 0\) represents the set of constraints, and \(L\) and \(U\) are vectors of lower and upper bounds on the variables. For details on the equation types allowed in GAMS, see Equation Types. Note that this is the same as NLP, except that non-smooth functions, like `abs`

, `min`

, `max`

may appear in \(f(x)\) and \(g(x)\).

For information on DNLP solvers that can be used through GAMS see the Solver/Model type Matrix.

- Attention
- We strongly advise against using the model type
`DNLP`

. The best way to model discontinuous functions is with binary variables, which results in a model of the type MINLP. The model [ABSMIP] demonstrates this formulation technique for the functions`abs`

,`min`

,`max`

and`sign`

. See also section Reformulating DNLP Models. - Solvers may have difficulties when dealing with the discontinuities, since they are really NLP solvers and the optimality conditions and the reliance on derivatives may be problematic. Using a global solver may alleviate this problem.

- We strongly advise against using the model type

### Mixed Integer Programming (MIP)

Mathematically, the Mixed Integer Linear Programming (MIP) problem looks like:

\begin{equation*} \begin{array}{lrclll} \textrm{Maximize or Minimize} & c_1 t + c_2 u + c_3 v + c_4 w + c_5 x + c_6 y + c_7 z & & & & \\ \textrm{subject to} & A_1 t + A_2 u + A_3 v + A_4 w + A_5 x + A_6 y + A_7 z & \alpha & b & & \\ & t & \in & \mathbb R & &\\ & u & \geq & 0 & \textrm{and}\,\, u \leq L_2 & \textrm{and} \, \, u \in \mathbb Z \\ & v & \in & (0,1) & &\\ & w & \in & \textrm{SOS1} & &\\ & x & \in & \textrm{SOS2} & &\\ & y & = & 0 & \textrm{or} \, \, \, L_6 \leq y & \\ & z & = & 0 & \textrm{or} \,\, \, L_7 \leq z & \textrm{and} \,\, z \in \mathbb Z,\\ \end{array} \end{equation*}

where

- \(c_1t + c_2u + c_3v + c_4w + c_5x + c_6y + c_7z\) is the objective function,
- \( A_1t + A_2u + A_3v + A_4w + A_5x + A_6y + A_7z \,\, \alpha \,\, b\) represents the set of constraints of various equality and inequality forms,
- \( t\) is a vector of variables that are continuous real numbers,
- \( u\) is a vector of variables that can only take integer values smaller than \( L_2 \),
- \( v \) is a vector of binary variables,
- \( w \) is a vector of variables that belong to
`SOS1`

sets; this means that at most one variable in the set is nonzero, - \( x \) is a vector of variables that belong to
`SOS2`

sets; this means that at most two adjacent variables in the set are nonzero, - \( y \) is a vector of variables that are semi-continuous; they are either zero or larger than \( L_6 \),
- \( z \) is a vector of variables that are semi-integer; they are integer and either zero or larger than \( L_7 \).

For details on the equation types allowed in GAMS, see Equation Types. For more details on MIPs in GAMS, especially the use of `SOS`

and `semi`

variables, see section Special Mixed Integer Programming (MIP) Features.

For information on MIP solvers that can be used through GAMS, see the Solver/Model type Matrix.

- Attention
- Not all MIP solvers cover all the cases associated with
`SOS`

and`semi`

variables. Please consult the solver manuals for details on capabilities.

### Mixed Integer Nonlinear Programming (MINLP)

Mathematically, the Mixed Integer Nonlinear Programming (MINLP) problem looks like:

\begin{equation*} \begin{array}{ll} \textrm{Maximize or Minimize} & f(x) + Dy \\ \textrm{subject to} & g(x) + Hy \, \, \alpha \, \, 0 \\ & L \leq x \leq U \\ & y = \{0,1,2,\cdots\}, \\ \end{array} \end{equation*}

where \(x\) is a vector of variables that are continuous real numbers, \(y\) denotes a vector of variables that can only take integer values, \(f(x)+ Dy\) is the objective function, \(g(x) + Hy\ \, \alpha \, 0\) represents the set of constraints, and \(L\) and \(U\) are vectors of lower and upper bounds on the variables. For details on the equation types allowed in GAMS, see Equation Types. Further, \( y = \{0,1,2,\cdots\} \) is the integrality restriction on \(y\).

For information on MINLP solvers that can be used through GAMS see the Solver/Model type Matrix.

- Note
`SOS`

and`semi`

variables can also be accommodated by some solvers. Please consult the solver manuals for details on capabilities.- The model attribute TryLinear causes GAMS to examine whether the problem may be solved as a MIP problem. For details on model attributes, see subsection Model Attributes.

### Mixed Integer Quadratically Constrained Programs (MIQCP)

A Mixed Integer Quadratically Constrained Program (MIQCP) is a special case of the MINLP in which all the nonlinearities are required to be quadratic. For details see the description of the QCP, a special case of the NLP.

For information on MIQCP solvers that can be used through GAMS, see the Solver/Model type Matrix.

- Note
- The model attribute TryLinear causes GAMS to examine whether the problem may be solved as a MIP problem. For details on model attributes, see subsection Model Attributes.

### Mixed Complementarity Problem (MCP)

Unlike the other model types we have introduced so far, the Mixed Complementarity Problem (MCP) does not have an objective function. An MCP is specified by three pieces of data: a function \(F(z): \mathbb R^n \mapsto \mathbb R^n \), lower bounds \(l \in \{\mathbb R \cup \{-\infty\}\}^n \) and upper bounds \(u \in \{\mathbb R \cup \{\infty\}\}^n \). A solution is a vector \( z \in \mathbb R^n \) such that for each \( i \in \{1, \ldots, n\} \), one of the following three conditions hold:

\[ \begin{array}{rcl} F_i(z) = 0 & \mbox{ and } & \ell_i \leq z_i \leq u_i \, \, \, \mbox{ or} \\ F_i(z) > 0 & \mbox{ and } & z_i = \ell_i \, \, \, \mbox{ or} \\ F_i(z) < 0 & \mbox{ and } & z_i = u_i . \end{array} \]

This problem can be written compactly as

\begin{equation*} F(z) \, \perp \, L \leq z \leq U, \end{equation*}

where the symbol \( \perp \) (which means "perpendicular to", shortened to "perp to") indicates pair-wise complementarity between the function \(F \) and the variable \(z\) and its bounds.

The following special case is an important and illustrative example:

\begin{equation*} F(z) \perp z \geq 0. \end{equation*}

In this example, the unstated but implied upper bound \(u\) is infinity. Since \(z\) is finite, we cannot have \( z_i = u_i \) and the third condition above cannot hold: this implies \( F(z) >= 0 \). The remaining two conditions imply pair-wise complementarity between \(z >= 0\) and \(F(z) >= 0\). This is exactly the Nonlinear Complementarity Problem, often written as

\begin{equation*} F(z) \geq 0, \quad z \geq 0, \quad \langle{F(z)},{z}\rangle = 0. \end{equation*}

None of this rules out the degenerate case (i.e. \(F_i(z)\) and \( z_i \) both zero). In practice, these can be difficult models to solve.

Another special case arises when the bounds \( L \) and \( U \) are infinite. In this case, the second and third conditions above cannot hold, so we are left with \( F(z) = 0 \), a square system of nonlinear equations. And finally, we should mention a special case that occurs frequently in practice: if \( \ell_i = u_i \) (i.e. \( z_i \) is fixed) then we have a complementary pair: one of the three conditions will hold as long as \(F_i(z)\) is defined. Essentially, fixing a variable removes or obviates the matching equation. This is often useful when modeling with MCP.

The definition above describes the canonical MCP model as it exists when GAMS passes it to an MCP solver. Some models have exactly this form even in the GAMS code, but usually some processing is done by the GAMS system to arrive at a model in this form. Here we'll describe the steps of this process and illustrate with an example from the model library.

- The process starts with the list of rows (aka single equations) and columns (aka single variables) that make up the MCP model, and potentially some matching information.
- The usual rules apply: rows are part of the model because their associated equations are included in the model statement, but columns only become part of the model by use: a column enters the model only if it is used in some row of the model. Therefore including a variable symbol as part of a match in the model statement will not influence the set of columns belonging to the model.
- Matches (where they exist) are pointers from rows to columns.
- Technically, the MCP is defined via a function \(F\) while a model contains constraints. Given a constraint, we define an associated function as LHS - RHS, so e.g. \(F_i \geq 0\) is consistent with a
`=G=`

constraint.

- The explicit matches are processed: each match creates a complementary pair. What remains after the explicit matches are consumed are the unmatched rows and unmatched columns.
- It is an error for any column to be matched to multiple rows, so the row-column matching is one-to-one.
- For each match some consistency checks between the column bounds and the row type are made. For details, see Table 2.
- For example, matching an =N= row with any column is good, matching an =E= row with a free column is good, matching an =E= row with a lower-bounded column is allowed, and matching a =G= row with an upper-bounded column results in an error.

- Any fixed columns remaining are ignored: these columns can be treated like exogenous variables or parameters.
- If what remains is a set of =E= rows and an
*equal number*of unbounded columns, these can be matched up in any order and we have a well-defined MCP. If this is not what remains, an error is triggered.

To illustrate how this works, consider the spatial equilibrium model [SPATEQU] with the following model statement:

```
Model P2R3_MCP / dem, sup, in_out.p, dom_trad.x /;
```

- The model
`P2R3_MCP`

includes the rows from equations`dem`

,`sup`

,`in_out`

and`dom_trad`

and exactly the columns used by these rows. Checking the listing file, we see columns for`Qd`

,`Qs`

,`x`

, and`p`

. In addition, the model statement specifies two matches:`in_out.p`

and`dom_trad.x`

. These matches always take the form of an`equation.variable`

pair, with no indices or domains included. - In this example, the rows corresponding to the equation
`in_out`

match up perfectly with the columns from the variable`p`

: there are no holes in the set of rows or columns because of some dollar conditions in the equation definition. We have a one-to-one match so all the rows of`in_out`

and columns of`p`

are consumed by the match in the model statement. The same holds for the`dom_trad.x`

pair, so what is left are the rows of`dem`

and`sup`

and the columns of`Qd`

and`Qs`

, all of which are unmatched. - There are no fixed variables to remove.
- Since
`dem`

and`sup`

are =E= constraints and`Qd`

and`Qs`

are free variables, we can match them in any order without changing the solution set for this model. The counts of these unmatched equality rows and unmatched free variables are equal, so we get a well-defined MCP.

When rows are matched explicitly to columns, some care must be taken to match them consistently. For example, consider a row-column match *g.y*. The row *g* can be of several types: `=N=`

, `=E=`

, `=G=`

, or `=L=`

. An `=N=`

row can be matched to any sort of variable: the `=N=`

doesn't imply any sort of relationship, which works perfectly with our definition of \(
\perp \) above: the allowed sign or direction of *g* is determined completely by the bounds on the complementary variable *y*. If *g* is an `=E=`

row, this is consistent with a free variable *y*, but what if *y* has an active lower bound? By definition we allow *g* to be positive at solution, but this violates the declaration as an `=E=`

row. Such cases can be handled by marking the row with a * redef*. The total number of redefs for a given model is available via the NumRedef model attribute and is shown in the report summary. Note that the set of rows marked depends on the solution: in the example above, if

*g*is zero at solution it will not be marked as a redef, regardless of what the bounds are on

*y*. Finally, some combinations are simply not allowed: they will result in a model generation error. The table below lists the outcome for all possible combinations.

Column Bounds | `=N=` | `=E=` | `=G=` | `=L=` |
---|---|---|---|---|

lower | OK | redef | OK | ERROR |

upper | OK | redef | ERROR | OK |

free | OK | OK | OK | OK |

double | OK | redef | redef | redef |

fixed | OK | redef | redef | redef |

The definition, process, and rules above have several implications for valid MCP models:

- It is always acceptable to use the
`=N=`

notation when defining the equations in an MCP model,*provided these equations are matched explicitly*. In this case the bounds on`F(z)`

are implied by the bounds on the matching columns, and redefs will never occur. - Variables that are known to be lower-bounded (no upper bound) will match consistently with
`=G=`

equations. - Variables that are known to be upper-bounded (no lower bound) will match consistently with
`=L=`

equations. - Variables that are known to be unbounded will match consistently with
`=E=`

equations. - Where the bound structure is not known in advance, or both upper and lower bounds exist, a match with an
`=N=`

equation will always be consistent. Other equation types will result in errors or redefs. - The model may initially have fewer rows than columns, as long as the "extra" columns are unmatched fixed columns that ultimately get removed from the MCP passed to the solver.
- Any bounded-but-not-fixed column must be matched explicitly to a row.
- The only rows that may be unmatched are =E= rows.
- It is customary to re-use the constraints of an LP or NLP model when formulating the MCP corresponding to the Karush-Kuhn-Tucker (KKT) conditions. If the original model is a
*minimization*, the LP/NLP marginals`.m`

and the variables for these marginals in the MCP will use the same sign convention, and the orientation for the constraints will be consistent between the two models, making re-use easier.

As mentioned above, it is typical to use the same equations in both NLP and MCP models. Sometimes, it is not the original equation that is wanted for the MCP, but rather the reoriented (aka negated or flipped) equation. For example, the flipped version of `x**1.5 =L= y`

is `y =G= x**1.5`

, while `sqr(u) - sqr(v) =E= 5`

becomes ` - sqr(u) + sqr(v) =E= -5`

. Instead of re-implementing the equation in flipped form, the same result can be achieved by prefixing the equation name with a `-`

in the model statement. See the [mcp10] model for an example of such usage. When equations are used in flipped form, they are marked with a * redir* in the listing file's solution listing.

An example of complementarity that should be familiar to many is the relationship between a constraint and its associated dual multiplier: if the constraint is non-binding, its dual multiplier must be zero (i.e. at bound) while if a dual multiplier is nonzero the associated constraint must be binding. In fact, the KKT or first-order optimality conditions for LP and NLP models can be expressed and solved as an MCP.

These complementarity relationships found in optimization problems are useful in understanding the marginal values assigned to rows and columns in the GAMS solution for MCP. With no objective function, the usual definition for marginal values and their interpretation isn't useful. Instead, the GAMS MCP convention for the marginal values of columns is to return the slack of the associated row (i.e. its value when interpreted and evaluated as a function). For the marginal values of rows, the level value (*not* the slack) of the associated column is returned. When we apply this convention to the NCP ( \(F(z) \geq 0, z \geq 0, \langle{F(z)},{z}\rangle = 0\)) we see pairwise complementarity between the levels and marginals returned for each of the rows and columns in the model. This is also the case if we take the KKT conditions of an LP in a suitable standard form: minimization, \(x \geq 0, Ax \geq b\).

MCPs arise in many application areas including applied economics, game theory, structural engineering and chemical engineering. For further details on this class of problems, see http://www.neos-guide.org/content/complementarity-problems.

For information on MCP solvers that can be used through GAMS, see Solver/Model type Matrix.

### Constrained Nonlinear System (CNS)

The Constrained Nonlinear System (CNS) is the second GAMS model type that does not have an objective function. Mathematically, a CNS model looks like:

\begin{equation} \begin{array}{ll} \textrm{Find} & x \\ \textrm{subject to} & F(x) = 0 \\ & L \leq x \leq U \\ & G(x) \, \, \alpha \, \, b, \\ \end{array} \end{equation}

where \(x\) is a set of continuous variables and \(F\) is a set of nonlinear equations of the same dimension as \(x\). This is a key property of this model type: the number of equations equals the number of variables, so we have a square system. The (possibly empty) constraints \(L \leq x \leq U \) are not intended to be binding at the solution, but instead are included to constrain the solution to a particular domain, to avoid regions where \(F(x)\) is undefined, or perhaps just to give the solver a push in the right direction. The (possibly empty) constraints \(G(x) \, \, \alpha \, \, b\) are intended to serve the same purpose as the variable bounds and are silently converted to equations with bounded slacks.

Note that since there is no objective in a CNS model, there are no marginal values for variables and equations. Any marginal values already stored in the GAMS database will remain untouched. CNS models also make use of some model status values that allow a solver to indicate if the solution is unique (e.g. for a non-singular linear system) or if the linearization is singular at the solution. For singular models (solved or otherwise), the solver can mark one or more dependent rows with a * depnd*. The total number of rows so marked for a given model is available via the NumDepnd model attribute and is shown in the report summary.

The CNS model is a generalization of a square system of equations \(F(x) = 0\). Such a system could also be modeled as an NLP with a dummy objective. However, there are a number of advantages to using the CNS model type, including:

- A check by GAMS that the model is really square,
- solution/model diagnostics by the solver (e.g. singular at solution, (locally) unique solution),
- CNS-specific warnings if the side constraints \(L \leq x \leq U \) or \(G(x) \, \, \alpha \, \, b\) are active at a solution,
- and potential improvement in solution times, by taking better advantage of the model properties.

For information on CNS solvers that can be used through GAMS, see the Solver/Model type Matrix.

### Mathematical Program with Equilibrium Constraints (MPEC)

Mathematically, the Mathematical Program with Equilibrium Constraints (MPEC) problem looks like:

\begin{equation*} \begin{array}{ll} \textrm{Maximize or Minimize} & f(x,y) \\ \textrm{subject to} & g(x,y) \, \, \alpha \, \, 0 \\ & L_x \leq x \leq U_x \\ & F(x,y) \perp L_y \leq y \leq U_y, \\ \end{array} \end{equation*}

where \(x\) and \(y\) are vectors of continuous real variables. The variables \(x\) are often called the *control* or *upper-level* variables, while the variables \(y\) are called the *state* or *lower-level* variables. \(f(x,y)\) is the objective function. \(g(x,y) \, \alpha \, 0\) represents the set of traditional (i.e. NLP-type) constraints; some solvers may require that these constraints only involve the control variables \(x\). The function \(F(x,y)\) and the bounds \(L_y\) and \(U_y\) define the equilibrium constraints. If \(x\) is fixed, then \(F(x,y)\) and the bounds \(L_y\) and \(U_y\) define an MCP; the discussion of the "perp to" symbol \( \perp \) in that section applies here as well. From this definition, we see that the MPEC model type contains NLP and MCP models as special cases of MPEC.

A simple example of an entire MPEC model is given below.

```
variable z, x1, x2, y1, y2;
positive variable y1;
y2.lo = -1;
y2.up = 1;
equations cost, g, h1, h2;
cost.. z =E= x1 + x2;
g.. sqr(x1) + sqr(x2) =L= 1;
h1.. x1 =G= y1 - y2 + 1;
h2.. x2 + y2 =N= 0;
model example / cost, g, h1.y1, h2.y2 /;
solve example using mpec min z;
```

Note that as in the MCP, the complementarity relationships in an MPEC are specified in the model statement via equation-variable pairs: the `h1.y1`

specifies that the equation `h1`

is perpendicular to the variable `y1`

and the `h2.y2`

specifies that the equation `h2`

is perpendicular to the variable `y2`

. For details on the solve statement, see section The Solve Statement.

While the MPEC model formulation is very general, it also results in problems that can be very difficult to solve. The state-of-the-art for MPEC solvers is not nearly as advanced as that for other model types. As a result, you should expect the MPEC solvers to be more limited by problem size and/or robustness issues than solvers for other model types.

For information on MPEC solvers that can be used through GAMS, see the Solver/Model type Matrix. For more details on MPECs and solver development, see https://neos-guide.org/guide/types/mpec/.

### Extended Mathematical Programs (EMP)

Extended Mathematical Programming (EMP) is an (experimental) framework for automated mathematical programming reformulations. Using EMP, model formulations that GAMS cannot currently handle directly or for which no robust and mature solver technology exists can be automatically and reliably reformulated or transformed into models for which robust and mature solver technology does exist within the GAMS system. For more details, see the chapter on EMP. Currently EMP supports:

- Equilibrium problems including variational inequalities, Nash games, and Multiple Optimization Problems with Equilibrium Constraints (MOPECs).
- Hierarchical optimization problems such as bilevel programs.
- Disjunctive programs for modeling discrete choices with binary variables.
- Stochastic programs including two-stage and multi-stage stochastic programs, chance constraints and risk measures such as Variance at Risk (VaR) and Conditional Variance at Risk (CVaR).

Apart from the disjunctive and stochastic programming models mentioned above, EMP models are typically processed (aka solved) via the JAMS solver: this solver does the work of reformulation/transformation, calling GAMS to solve this reformulation, and post-processing the solution that results to bring it back in terms of the original EMP model.

Examples demonstrating how to use the EMP framework and the JAMS and DE solvers are available in the GAMS EMP Library. These solvers require no license of their own to run but can and do call subsolvers that *do* require a license.

## Model Attributes

Models have attributes that hold a variety of information, including

- information about the results of a solve performed, a solve statement, the solution of a model,
- information about certain features to be used by GAMS or the solver,
- information passed to GAMS or the solver specifying various settings that are also subject to option statements.

Model attributes are accessed in the following way:

```
model_name.attribute
```

Here `model_name`

is the name of the model in GAMS and `.attribute`

is the specific attribute that is to be accessed. Model attributes may be used on the left-hand side and the right-hand side of assignments. Consider the following example:

```
transport.resLim = 600;
x = transport.modelStat;
```

In the first line the attribute `.resLim`

of the model `transport`

is specified to be 600 (seconds). In the second line the value of the attribute `.modelStat`

of the model `transport`

is assigned to the scalar `x`

. Note that model attributes may also be used in display statements.

Some of the attributes are mainly used before the solve statement to provide information to GAMS or the solver link. Others are set by GAMS or the solver link and hence are mainly used after a solve statement.

Moreover, some of the attributes used before the solve may also be set via an option statement or the command line. Consider the following example:

```
option ResLim=10;
```

This line is an option statement and applies to all models. One can set the model attribute `.ResLim`

to overwrite the global `ResLim`

option. In order to revert the individual `.ResLim`

to the global `ResLim`

option, one needs to set the model attribute to `NA`

. For more on option statements, see chapter The Option Statement.

gams mymodel ResLim=10

This sets the global `ResLim`

option when invoking the gams run (e.g. from the command line). For more on command line parameters, see chapter The GAMS Call and Command Line Parameters.

Note that a model-specific option takes precedence over the global setting specified with an option statement and that a setting via an option statement takes precedence over a setting via the command line parameter.

The complete list of model attributes is given below. Observe that each entry is linked to a detailed description of the respective attribute, including information of whether the attribute is also available as command line parameter or option statement. Note that detailed descriptions of all GAMS command line parameters, options and model attributes are given in section Detailed Descriptions of All Options.

### Model Attributes Mainly Used Before Solve

Attribute | Description |
---|---|

bRatio | Basis detection threshold |

cheat | Cheat value, i.e. minimum solution improvement threshold |

cutOff | Cutoff value for branch and bound |

defPoint | Indicator for passing on default point |

dictFile | Force writing of a dictionary file if dictfile > 0 |

domLim | Domain violation limit solver default |

fdDelta | Step size for finite differences |

fdOpt | Options for finite differences |

holdFixed | Treat fixed variables as constants |

integer1..5 | Integer communication cells |

iterLim | Iteration limit of solver |

limCol | Maximum number of columns listed in one variable block |

limRow | Maximum number of rows listed in one equation block |

MCPRHoldFx | Print list of rows that are perpendicular to variables removed due to the holdfixed setting |

nodLim | Node limit in branch and bound tree |

optCA | Absolute Optimality criterion solver default |

optCR | Relative Optimality criterion solver default |

optFile | Default option file |

priorOpt | Priority option for variable attribute .prior |

real1..5 | Real communication cells |

reform | Reformulation level |

resLim | Wall-clock time limit for solver |

savePoint | Save solver point in GDX file |

scaleOpt | Employ user specified variable and equation scaling factors |

solPrint | Solution report print option |

solveLink | Solver link option |

solveOpt | Multiple solve management |

sysOut | Solver Status file reporting option |

threads | Number of threads to be used by a solver |

tolInfeas | Infeasibility tolerance for an empty row of the form a.. 0*x =e= 0.0001; |

tolInfRep | This attribute sets the tolerance for marking infeasible in the equation listing |

tolProj | Tolerance for setting solution values to a nearby bound when reading a solution |

tryInt | Whether solver should make use of a partial integer-feasible solution |

tryLinear | Examine empirical NLP model to see if there are any NLP terms active. If there are none the default LP solver will be used |

workFactor | Memory Estimate multiplier for some solvers |

workSpace | Work space for some solvers in MB |

### Model Attributes Mainly Used After Solve

Attribute | Description |
---|---|

domUsd | Number of domain violations |

etAlg | Solver dependent timing information |

etSolve | Elapsed time it took to execute a solve statement in total |

etSolver | Elapsed time taken by the solver only |

handle | Unique handle number of SOLVE statement |

iterUsd | Number of iterations used |

line | Line number of last solve of the corresponding model |

linkUsed | Integer number that indicates the value of SolveLink used for the last solve |

marginals | Indicator for marginals present |

maxInfes | Maximum of infeasibilities |

meanInfes | Mean of infeasibilities |

modelStat | Integer number that indicates the model status |

nodUsd | Number of nodes used by the MIP solver |

number | Model instance serial number |

numDepnd | Number of dependencies in a CNS model |

numDVar | Number of discrete variables |

numEqu | Number of equations |

numInfes | Number of infeasibilities |

numNLIns | Number of nonlinear instructions |

numNLNZ | Number of nonlinear nonzeros |

numNOpt | Number of nonoptimalities |

numNZ | Number of nonzero entries in the model coefficient matrix |

numRedef | Number of MCP redefinitions |

numVar | Number of variables |

numVarProj | Number of bound projections during model generation |

objEst | Estimate of the best possible solution for a mixed-integer model |

objVal | Objective function value |

procUsed | Integer number that indicates the used model type |

resCalc | Time spent in function and derivative calculations (deprecated) |

resDeriv | Time spent in derivative calculations (deprecated) |

resGen | Time GAMS took to generate the model in wall-clock seconds |

resIn | Time to import model (deprecated) |

resOut | Time to export solution (deprecated) |

resUsd | Time the solver used to solve the model in seconds |

rngBndMax | Maximum absolute non-zero value of bounds passed to the solver (excluding infinity) |

rngBndMin | Minimum absolute non-zero value of bounds passed to the solver |

rngMatMax | Maximum absolute non-zero value of coefficients in the model matrix passed to the solver (excluding infinity) |

rngMatMin | Minimum absolute non-zero value of coefficients in the model matrix passed to the solver |

rngRhsMax | Maximum absolute non-zero value of right hand sides passed to the solver (excluding infinity) |

rngRhsMin | Minimum absolute non-zero value of right hand sides passed to the solver |

rObj | Objective function value from the relaxed solve of a mixed-integer model when the integer solver did not finish |

solveStat | Indicates the solver termination condition |

sumInfes | Sum of infeasibilities |

sysIdent | Solver identification number |

sysVer | Solver version |

# The Solve Statement

Once a model has been defined using the model statement, the solve statement prompts GAMS to call one of the available solvers for the particular model type. This section introduces and discusses the solve statement in detail. For a list of GAMS model types, see Table 1. For information on how to specify desired solvers, see section Choosing a Solver.

- Note
- It is important to remember that GAMS does
*not*solve the problem, but passes the problem definition to one of a number of separate solver programs that are integrated with the GAMS system.

## The Syntax of the Solve Statement

In general, the syntax for a `solve`

statement is as follows. Note that there are two alternatives that are equally valid:

solve model_name using model_type maximizing|minimizing var_name; solve model_name maximizing|minimizing var_name using model_type ;

The keyword `solve`

indicates that this is a `solve`

statement. `Model_name`

is the name of the model as defined by a `model`

statement. Note that the `model`

statement must be placed before the `solve`

statement in the program. The keyword `using`

is followed by `model_type`

, which is one of the GAMS model types described above, see Table 1. The keywords `maximizing`

or `minimizing`

indicate the direction of the optimization. `Var_name`

is the name of the objective variable that is being optimized. An example of a `solve`

statement in GAMS is shown below.

```
Solve transport using lp minimizing cost ;
```

`Solve`

and `using`

are reserved words, `transport `

is the name of the model, `lp`

is the model type, `minimizing `

is the direction of optimization, and `cost`

is the objective variable. Note that an objective variable is used instead of an objective row or function.

- Attention
- The objective variable must be scalar and of type
`free`

, and must appear in at least one of the equations in the model.

Recall that some model types (e.g. the Constrained Nonlinear System (CNS) or the Mixed Complementarity Problem (MCP)) do not have an objective variable. So their `solve`

statement syntax is slightly different:

solve model_name using model_type;

As before, `solve`

and `using`

are keywords, `model_name`

is the name of the model as defined by a `model`

statement and `model_type`

is the GAMS model type CNS or MCP. There is no objective variable and consequently no direction of optimization. An example from the spatial equilibrium model [SPATEQU] illustrates this `solve`

statement:

```
Solve P2R3_MCP using mcp;
```

`P2R3_MCP`

is the model name, the model type is `MCP`

and as expected, there is no objective variable.

The EMP model type serves many purposes including some experimental ones. The solve statement with model type EMP can be with or without the objective variable and optimization direction. For more information, see chapter Extended Mathematical Programming (EMP).

## Actions Triggered by the Solve Statement

When GAMS encounters a solve statement during compilation (the syntactic check of the input file) or execution (actual execution of the program), it initiates a number of special actions. The purpose is to prevent waste that would be caused by solving a model that has apparently been incorrectly specified. During compilation the following are verified:

- All symbolic equations have been defined and the objective variable is used in at least one of the equations.
- The objective variable is scalar and of type
`free`

(even though lower and upper bounds may have been specified) `MCP`

models are checked for appropriate complementarity and squareness.- Each equation fits into the specified problem class (linearity for
`LP`

, continuous derivatives for`NLP`

, as outlined above). - All sets and parameters in the equations have values assigned.

- Note
- GAMS issues explanatory error messages if it discovers that the model is not according to type; for example, the presence of nonlinear terms in a supposedly LP model. For details on error messages, see chapter GAMS Output.

At execution time the solve statement triggers the following sequence of steps:

- The model is translated into the representation required by the solution system to be used.
- Debugging and comprehension aids that the user wishes to see are produced and written to the output file (
`EQUATION LISTING`

, etc). For customizing options (e.g. LimRow and LimCol), see chapter The Option Statement. - GAMS verifies that there are no inconsistent bounds or unacceptable values (for example,
`NA`

or`UNDF`

) in the problem. - Any errors detected at this stage cause termination with as much explanation as possible, using the GAMS names for the identifiers causing the trouble.
- GAMS designs a solution strategy based on the possible availability of level values or basis information from a previous solution: all available information is used to provide efficiency and robustness of operation. Any specifications provided by the user (Iteration limits etc.) are incorporated. A solver is chosen which is either the default solver for that problem type, the solver specified on the command line or the solver chosen by an option statement. For details see section Choosing a Solver.
- GAMS passes control to the solution subsystem and waits while the problem is being solved.
- GAMS reports on the status of the solution process and loads solution values back into the GAMS database. This causes new values to be assigned to the
`.l`

and`.m`

fields for all individual equations and variables in the model. In addition, the post solution model attributes are assigned. The procedure for loading back the data associated with level and marginal values may be customized using the SolveOpt model attribute and option. A row by row and column by column listing of the solution is provided by default. It may be suppressed by the SolPrint model attribute or option. Any apparent difficulty with the solution process will cause explanatory messages to be displayed. Errors caused by forbidden nonlinear operations are reported at this stage.

- Note
- When the solver does not provide a dual solution (.m), then GAMS does not print the marginal column in the solution listing and set the marginal field in variables and equations to NA.

The outputs from these steps, including any possible error messages, are discussed in detail in chapter GAMS Output.

# Programs with Several Solve Statements

Several solve statements can be processed in the same program. The next few subsections discuss various instances where several `solve`

statements may be needed in the same file. If sequences of expensive or difficult models are to be solved, it might be useful to interrupt program execution and continue later. For details on this topic, see chapter The Save and Restart Feature.

## Several Models

If there are different models then the solves may be sequential, as below. Each of the models in `[PROLOG]`

consists of a different set of equations, but the data are identical, so the three solves appear in sequence with no intervening assignments:

```
Solve nortonl using nlp maximizing z;
Solve nortonn using nlp maximizing z;
Solve nortone using nlp maximizing z;
```

When there is more than one `solve`

statement in the program, GAMS uses as much information as possible from the previous solution to provide a starting point or basis in the search for the next solution.

## Loop: One Model, Different Data

Multiple solves may also occur as a result of a solve statement within a `loop`

statement. Loop statements are introduced and discussed in detail in chapter Programming Flow Control Features; here we show that they may contain a solve statement and thus lead to multiple solves within one model. The example from [MEANVAR] computes the efficient frontier for return and variance for a portfolio selection problem at equidistance points.

```
loop(p(pp),
v.fx = vmin + (vmax-vmin)/(card(pp)+1)*ord(pp) ;
Solve var1 maximizing m using nlp ;
xres(i,p) = x.l(i);
xres('mean',p) = m.l;
xres('var',p) = v.l;
);
```

The set `p`

is a set of point between the minimum and maximum variance, it is the driving set of the loop. A variance variable v is fixed at a equidistance points. With each iteration through the loop another variance level is used, the `NLP`

model var1 is solved for each iteration and the outputs are stored in the parameter `xres(*,pp)`

, to be used later for reporting. As often for reporting purposes, the universal set `*`

is used.

This example demonstrates how to solve the same model (in terms of variables and equations) multiple times with slightly different data. For such situations the Gather-Update-Solve-Scatter (GUSS) facility improves on the loop implementation by saving generation time and minimizing the communication with the solver. GUSS is activated by the additional keyword `scenario`

in the solve statement followed by a set name that provides mapping information between parameters in the model and the scenario containers. A GUSS implementation of the loop would look as follows:

```
parameter vfx(p), px(p,i), pm(p);
set dict / p .scenario.''
v .fixed .vfx
x .level .px
m .level .pm /;
vfx(p(pp)) = vmin + (vmax-vmin)/(card(pp)+1)*ord(pp);
Solve var1 maximizing m using nlp scenario dict;
xres(i,p) = px(p,i);
xres('mean',p) = pm(p);
xres('var',p) = vfx(p);
```

## Customizing Solution Management: SolveOpt

It is important to consider how GAMS manages solutions if multiple models are solved. By default, GAMS merges subsequent solutions with prior solutions. This is not an issue if all models operate over the same set of variables. However, recursive procedures, different equation inclusions or logical conditions may cause only part of the variables or different variables to appear in the models to be solved. In such a case it might be useful to modify the solution management procedure using the model attribute or option SolveOpt.

## Sensitivity or Scenario Analysis

Multiple solve statements can be used not only to solve different models, but also to conduct sensitivity tests, or to perform case (or scenario) analyses of models by changing data or bounds and then solving the same model again. While some commercial LP systems allow access to "sensitivity analysis" through GAMS it is possible to be far more general and not restrict the analysis to either solver or model type. This facility is even more useful for studying many scenarios since no commercial solver will provide this information.

An example of sensitivity testing is in the simple oil-refining model [MARCO]. Because of pollution control, one of the key parameters in oil refinery models is an upper bound on the sulfur content of the fuel oil produced by the refinery. In this example, the upper bound on the sulfur content of fuel oil was set to 3.5 percent in the original data for the problem. First, the model is solved with this value. Next, a slightly lower value of 3.4 percent is used and the model is solved again. Finally, the considerably higher value of 5 percent is used and the model is solved for the last time. Key solution values are saved for later reporting after each solve. This is necessary because a following solve replaces any existing values. The key solution values are the activity levels of the process level `z`

, a variable that is defined over a set of processes `p`

and a set of crude oils `cr`

. The complete sequence is:

```
parameter report(*,*,*) "process level report";
qs('upper','fuel-oil','sulfur') = 3.5 ;
Solve oil using lp maximizing phi;
report(cr,p,'base') = z.l(cr,p) ;
report('sulfur','limit','base') = qs('upper','fuel-oil','sulfur');
qs ('upper','fuel-oil','sulfur') = 3.4 ;
Solve oil using lp maximizing phi ;
report(cr,p,'one') = z.l(cr,p) ;
report('sulfur','limit','one') = qs ('upper','fuel-oil','sulfur');
qs('upper','fuel-oil','sulfur') = 5.0 ;
Solve oil using lp maximizing phi ;
report(cr,p,'two') = z.l(cr,p) ;
report('sulfur','limit','two') = qs('upper','fuel-oil','sulfur');
Display report ;
```

Note that the parameter `report`

is defined over the universal set or short *universe*. In general, the universe is useful when generating reports, otherwise it would be necessary to provide special sets containing the labels used in the report. Any mistakes made in spelling labels used only in the report should be immediately apparent, and their effects should be limited to the report. The parameter `qs`

is used to set the upper bound on the `sulfur`

content in the `fuel-oil`

, and the value is retrieved for the report. Note that the `display`

statement in the final line is introduced and discussed in detail in chapter The Display Statement. This example shows not only how simply sensitivity analysis can be done, but also how the associated multi-case reporting can be handled.

The output from the `display`

statement is shown below. Observe that there is no production at all if the permissible sulfur content is lowered. The *case attributes* have been listed in the row `SULFUR.LIMIT`

. Section Global Display Controls contains more details on how to arrange reports in a variety of ways.

---- 225 PARAMETER report process level report base one two mid-c .a-dist 89.718 35.139 mid-c .n-reform 20.000 6.772 mid-c .cc-dist 7.805 3.057 w-tex .cc-gas-oil 5.902 w-tex .a-dist 64.861 w-tex .n-reform 12.713 w-tex .cc-dist 4.735 w-tex .hydro 28.733 sulfur.limit 3.500 3.400 5.000

- Note
- For other ways to do comparative analyses with GAMS, see the tutorial Comparative Analyses with GAMS.

## Iterative Implementation of Non-Standard Algorithms

Another use of multiple solve statements is to permit iterative solution of different blocks of equations, most often using solution values from the first solve as data for the next solve. These decomposition methods are useful for certain classes of problems because the subproblems being solved are smaller, and therefore more tractable. One of the most common examples of such a method is the Dantzig-Wolfe decomposition.

An example of a problem that is solved in this way is a multi-commodity network flow problem in [DANWOLFE].

# Choosing a Solver

After a model has been checked and prepared as described above, GAMS passes the model to a solver. When the GAMS system is installed default solvers for all model types are specified and these solvers are used if the user doesn't specify anything else. It is easy to switch to other appropriate solvers provided the user has the corresponding license. There are multiple ways to switch solvers:

- Using a command line parameter of the following form:
gams mymodel model_type=solver name

For example,gams mymodel lp=cbc

- With an option command of the following form that is placed before the
`solve`

statement:Option model_type=solver_name;

Here`option`

is a keyword,`model_type`

is the same model type that is used in the`solve`

statement and`solver_name`

is the name of one of the available solvers. For example,

The`Option LP=cbc, NLP=conopt, MIP=cbc, MINLP=default;`

`MINLP=default`

switches back to the default solver for the MINLP model type. - Instead of providing a particular solver for a model type, the option Solver can be used to use a given solver for all model types this solver can handle.
`Option Solver=cbc;`

- (Re)running
`gamsinst`

at any time and altering the choice of default solver as described in the installation notes.

- Note
- A list of all solvers and current default solvers may be generated in the
`listing`

file with`Option SubSystems;`

.

# Making New Solvers Available with GAMS

This short section is to encourage those of you who have a favorite solver not available through GAMS. Linking a solver program with GAMS requires some programming skills and the use of libraries provided by GAMS. There is a collection of open source solver links to GAMS at the COIN-OR project GAMSLinks. The benefits of a link with GAMS to the developer of a solver are several. They include:

- Immediate access to a wide variety of test problems.
- An easy way of making performance comparisons between solvers.
- The guarantee that a user has not somehow provided an illegal input specification.
- Elaborate documentation, particularly of input formats, is not needed.
- Access to the existing community of GAMS users, for marketing or testing.

This completes the discussion of the model and solve statements.